Post Installation¶
Here are a few configuration options that are commonly changed once the installation is completed. Please note that these changes are optional.
Display called name on internal calls¶
Note
Configured by default if you checked the Apply default onfiguration for France at the wizard time (see Wizard configuration step).
When you call internally another phone of the system you would like your phone to display the name of the called person (instead of the dialed number only). To achieve this you must change the following SIP options:
:
- Trust the Remote-Party-ID: yes,
- Send the Remote-Party-ID: select
PAI
Incoming caller number display¶
The caller ID number on incoming calls depends on what is sent by your operator.
You can modify it via the file /etc/xivo/asterisk/xivo_in_callerid.conf
.
Note
The reverse directory lookup use the caller ID number after it has been modified by
xivo_in_callerid.conf
Examples:
If you use a prefix to dial outgoing numbers (like a 0) you should add a 0 to all the
add =
sections,You may want to display incoming numbers in E.164 format. For example, you can change the
[national1]
section to:callerid = ^0[1-9]\d{8}$ strip = 1 add = +33
To enable the changes you have to restart xivo-agid:
service xivo-agid restart
Time and date¶
Configure your locale and default time zone device template =>
by editing the default templateConfigure the timezone in =>
If needed, reconfigure your timezone for the system:
dpkg-reconfigure tzdata
Codecs¶
Note
Configured by default if you checked the Apply default onfiguration for France at the wizard time (see Wizard configuration step).
You should also select default codecs. It obviously depends on the telco links, the country, the phones, the usage, etc. Here is a typical example for Europe (the main goal in this example is to select only G.711 A-Law instead of both G.711 A-Law and G.711 µ-Law by default):
SIP :
:Customize codec : enabled
Codec list:
G.711 A-Law G.722 G.729A H.264