UC Assistant

Note

This section describes the feature of the UC Assistant application. It is available as a web application from your Web Browser. It is also available as a desktop application with these additionnal features:

To install the desktop application, see the desktop application installation page.

What is the XiVO UC Assistant ?

The XiVO UC Assistant is a Web application that enables a user to:

  • search contacts and show their presence, phone status

  • make calls through physical phone or using WebRTC

  • transfer incoming or outgoing calls

  • access voicemail

  • enable call forwarding and Do Not Disturb (aka DND)

  • show history of calls

  • chat between XiVO users also using UC assistant

Login

To login, you must have a user configured on the XiVO PBX with:

  • CTI Login enabled,

  • Login, password and profile configured

  • A configured line with a number

Warning

If a user tries to login without a line, an error message is displayed and user is redirected to the login page (this applies also to Desktop Applications )

../../_images/errornoline.png

Note

Automatic login keeps you signed in until you log out.

Forwarding Calls and DND

From UC Assistant you can activate Do Not Disturb to block all incoming calls or forward call to any another number just by clicking on action button as seen on following screenshot:

../../_images/action.png

You can then change your settings and enable them.

../../_images/forward_dnd.png

Action possibles are :

  • Enable DND

  • Disable DND

  • Edit call forwarding (for both unconditional or on missed call only)

You know that all incoming calls will be rejected once you see the following logo in the header bar :

../../_images/forward_dnd_logo.png

All calls are forwarded once you see this following one :

../../_images/forward_logo.png

Finally, calls are forwarded only if you missed it when you see this one :

../../_images/forward_na_logo.png

Note

If calls are redirected, the forward number will be shown under your name.

Nevertheless, there is a precedence, if DND mode is enabled and also call forwarding, calls will be rejected.

Call history

The call history tab lists all the recent calls you were part of. For each call, it displays the status (received, emitted…), the duration, as well as the time when the call happened. You also see the phone status of internal users. You can hover your mouse cursor on a call to add this phone to your contact, or call it. You can also click on it to unfold it and see the call(s) details.

../../_images/call_history.png

Favorites

Click on the star to put a contact in its list of favorites. Favorites must be configured in the XiVO PBX as described in Favorites.

Personal contacts

From top-right hamburger menu, it is possible to display additional actions to handle you personal contacts. You will be able to create, delete all, import and export personal contact that you will be either able to search from the toolbar or find them in favorites panel if starred.

../../_images/hamburger_menu.png

Create a personal contact

Just fill wanted fields (such as name and number), click on star if you want this contact to be displayed in favorites panel.

Warning

It is not possible to have twice the same personal contact, at least one field must differ.

Warning

Every contact must have at least a name (either firstname or lastname) and a number (either number, mobile or other number).

../../_images/add_pc.png

It’s also possible to create a personal contact from call history by hovering a call item and so have pre-filled fields.

Edit a personal contact

To edit a personal contact, you should search it first, and a pencil icon will be displayed on the user line as in the following screen:

../../_images/edit_pc.png

Once clicked, you are redirected to edition pane where you just fill wanted fields.

Delete a personal contact

To delete a personal contact, you should edit it first, then you just need to click on trashcan icon :

../../_images/delete_pc.png

Once clicked, you are invited to confirm or not the deletion of this contact.

Import personal contacts

From menu, you can upload a .csv file that contains all the data of your personal contacts. You can either use a file exported from this same interface or create yours.

Here are the list of available attributes of a personal contact:

  • company

  • email

  • fax

  • firstname

  • lastname

  • mobile

  • number

As an example here a csv file that can be imported

company,email,fax,firstname,lastname,mobile,number
corp,jdoe@company.corp,3333,John,Doe,2222,1111

Note

File exported from previous xivo-client is also compatible with UC assistant.

Reverse lookup

By default, reverse lookup is enabled for personal contact display on incoming calls. Configuration is set to display firstname and lastname if number or mobile matches an existing personal contact.

Phone integration

The UC Assistant can integrate with the phone to :

As these features are closely linked to the phone to work, you must check supported phones for UC Assistant and follow the Required configuration page.

Once, you’re phone is properly configured and you are connected as a user, you know that your using SIP phone once you see the following logo in the header bar :

../../_images/fixed_logo.png

On hold notifications

You can be notified if you forget a call in hold for a long time, see configuration section.

../../_images/user-hold-notification.png

Conferences

When joining a conference, either as an attendee or an organizer, the UC Assistant will display specific informations about the conference you are joining.

Note

On WebRTC and Snom phones you can also do a device hosted three-party conference, in this section we describe features of the XiVO hosted conferences.

../../_images/conference_overview.png

Conference information:

  • The timer next to the conference name displays how long the conference has been running.

  • The first line displays the number of attendee.

Conference actions:

As an attendee, you can only:

  • Exit a conference room by clicking the hangup button

  • Put the conference on hold. Other attendees will not hear any hold music (if you’re on the same XiVO) but will not be able to hear you neither you will be able to hear the conference room.

As an organizer, you will also be able to:

  • Mute/Unmute all other attendee in the conference room

Attendees information:

../../_images/conference_attendees_muted.png
  • Attendees name, number and timer are displayed below the conference name

  • Attendees are ordered by name with the exception of the first one which always reflect the current user

  • Conference organizer are displayed in green

  • When an attendee is muted, a slashed microphone icon will be displayed next to its name

  • When an attendee is talking, a green speaker will be displayed next to its name

Attendee action:

../../_images/conference_attendee_mute_itself.png

Participant can :

  • Mute/Unmute itself. If the participant is muted and starts speaking, the microphone icon in the volume meter will blink in red as a reminder. This red warning only happens in audio conferences, not in normal phone calls.

../../_images/blinking-mic.png
  • Include an ongoing secondary call to a conference via the include button.

../../_images/include_to_conf.png

Organizer can also:

  • Mute/Unmute any attendee

  • Kick out an attendee. A message will be played to the kicked out attendee before leaving the conference.

  • Invite a user to the conference.

    This can be done by clicking the invite to conference button in the user dropdown menu :

    • from the favorites tab,

    • or from the search results, by searching for a username.

../../_images/invite_to_conf_from_search_results.png
  • The organizer can also invite a phone number to a conference via the additional call options. This option will be displayed after the organizer starts typing a phone number in the search bar.

../../_images/invite_to_conf_dropdown.png

Instant Messaging

It is possible from the assistant to send chat messages and have private text conversation. It is possible to deactivate it if this feature is not suitable for your needs or if you have already an external chat application, see Disabling chat in UC Assistant and Switchboard.

There are two possible behaviors for handling messages:

  1. No persistance (default) : Each message is an instant message that can be sent to another user logged in. messages are not stored anywhere and will be discarded once you refresh the page or log out.

  2. With persistence : Can be enabled with Chat Backend. This allows then

  • To send messages to offline users

  • To retrieve you conversation history with other parties

  • To receive notifications when you logs in if you have unread messages that has been received while you were disconnected.

../../_images/chat.png

When you send a message, you are notified if the message was sent successfully or if the message was not received because the recipient is not logged in.

When you receive a message, you are notified with a orange badge on the message tabs. If you are using the desktop application, the electron tray icon also shows an orange badge. You will also have a notification from your web browser or a system notification if you are using the desktop application.

You can send links in message, they will be clickable. You can also write emojis from your keyboard (e.g., :smile:). You can find here some emojis exemple.

The conversation window also allows you to call a user on their internal phone number directly from the chat. To do so, you can click on the phone icon next to the name of the user you’re chatting with. If the video calls are available on your XiVO, you can launch one by clicking on the camera.

../../_images/call-in-chat-uc.png

You can send a message from different places in the application :

  • From the contact line :

../../_images/chat_from_contact_line.png
  • From an ongoing call :

../../_images/chat_from_ongoing_call.png
  • from a conference call :

../../_images/chat_in_conferences.png

You are also able to list, at any time, all your ongoing conversation from the message tab :

../../_images/chat_list.png

External directory

This feature will add an additional book icon on the left side of the search bar. When clicking on this book icon, it will open (or close) the defined external directory (the external directory being a directory accessible via an URL).

To enable it, see configuration section.

Note

The search in the search bar will not search in this directory. But a search could be implemented in this external directory.

The screenshot below shows an example: when clicking on the book icon the external directory is shown. Here this external directory was developped to list users per site.

../../_images/external_directory.png

Logout

The logout button can be found after going in the top-right hamburger menu, which looks like the screenshot below :

../../_images/logout_button_configuration_menu.png

You will then be brought back to the login page.

Meeting room

You can join an audio-video conference, called meeting room, which will open on the side of your application. See Meeting Rooms PRO for more information.

Using web and mobile applications together

Note

This section concerns only WebRTC users, not Unique Account or SIP phone users.

After a user connects to the mobile application for the first time, a pop up notification will be sent on their UCAssistant. This is to inform the user that they will now receive calls on both mobile and web application. The user will be able to change this by clicking on the call management section :

../../_images/call_management_arrow.png

They can then choose if they want to receive calls on the mobile application, web application, or on both.

../../_images/mobile_or_web_app.png
../../_images/mobile_app_calls.png

After a user uninstalled the mobile application, they can unpair the mobile app from the assistant by clicking on the chain icon next to the mobile option.

../../_images/unpair_mobile_app.png