Meeting Rooms Configuration

Meeting Rooms configuration 

Create default env file 

Launch the following commands that will generate the .env file:

Warning

Please Copy the whole code block below and Paste it in a terminal. It will (re)generate the .env file. Do not copy-paste only the .env content because it contains specific here-document syntax.

function generatePassword() {
    openssl rand -hex 16
}

JICOFO_AUTH_PASSWORD=$(generatePassword)
JVB_AUTH_PASSWORD=$(generatePassword)
JIGASI_XMPP_PASSWORD=$(generatePassword)
JIGASI_SIP_PASSWORD=$(generatePassword)

cat > /etc/docker/meetingrooms/.env << EOF
# XiVO vars
XIVOCC_TAG=2023.05
XIVOCC_DIST=latest
XUC_HOST=<FILL IN>
MEETING_ROOMS_HOST_IP=<FILL IN>
XIVO_HOST=<FILL IN>
#
# XiVO Edge vars
#
TURN_CREDENTIALS=<FILL IN>
TURN_HOST=<FILL IN>
TURN_PORT=3478
TURNS_HOST=\${TURN_HOST}
TURNS_PORT=3478
#
# JWT Configuration
ENABLE_AUTH=1
ENABLE_GUESTS=0
AUTH_TYPE=jwt
JWT_APP_ID=xivo
JWT_APP_SECRET=<FILL IN>
#
# Security
#
JICOFO_AUTH_PASSWORD=${JICOFO_AUTH_PASSWORD}
JVB_AUTH_PASSWORD=${JVB_AUTH_PASSWORD}
JIGASI_XMPP_PASSWORD=${JIGASI_XMPP_PASSWORD}
#
# Basic config
#
CONFIG=/etc/docker/meetingrooms/jitsi/
DOCKER_HOST_ADDRESS=\${MEETING_ROOMS_HOST_IP}
HTTP_PORT=80
HTTPS_PORT=443
TZ=Europe/Paris
PUBLIC_URL=https://\${XUC_HOST}/video
ENABLE_CLOSE_PAGE=true
ENABLE_SIMULCAST=false
ENABLE_BACKGROUND_SELECTION=false
#
# Basic Jigasi configuration options
#
JIGASI_SIP_URI=xivo-jitsi@\${XIVO_HOST}
JIGASI_SIP_PASSWORD=${JIGASI_SIP_PASSWORD}
JIGASI_SIP_SERVER=\${XIVO_HOST}
JIGASI_SIP_PORT=5060
JIGASI_SIP_TRANSPORT=UDP
#
#  Basic Video configuration option
#
DESKTOP_SHARING_FRAMERATE_MIN=5
DESKTOP_SHARING_FRAMERATE_MAX=30
#
# Advanced configuration options (you generally don't need to change these)
#
XMPP_DOMAIN=meet.jitsi
XMPP_SERVER=xmpp.meet.jitsi
XMPP_BOSH_URL_BASE=http://xmpp.meet.jitsi:5280
XMPP_AUTH_DOMAIN=auth.meet.jitsi
XMPP_MUC_DOMAIN=muc.meet.jitsi
XMPP_MODULES=muc_size
XMPP_INTERNAL_MUC_DOMAIN=internal-muc.meet.jitsi
XMPP_GUEST_DOMAIN=guest.meet.jitsi
JVB_BREWERY_MUC=jvbbrewery
JVB_AUTH_USER=jvb
JVB_STUN_SERVERS=meet-jit-si-turnrelay.jitsi.net:443
JVB_PORT=10000
JVB_TCP_HARVESTER_DISABLED=true
JVB_TCP_PORT=4443
JVB_TCP_MAPPED_PORT=4443
JICOFO_AUTH_USER=focus
JIGASI_XMPP_USER=jigasi
JIGASI_BREWERY_MUC=jigasibrewery
JIGASI_PORT_MIN=20000
JIGASI_PORT_MAX=20050
XMPP_RECORDER_DOMAIN=recorder.meet.jitsi
JIBRI_RECORDER_USER=recorder
JIBRI_XMPP_USER=jibri
JIBRI_BREWERY_MUC=jibribrewery
JIBRI_PENDING_TIMEOUT=90
RESTART_POLICY=unless-stopped
ENABLE_P2P=false
EOF

Then open the /etc/docker/meetingrooms/.env and fill in:

XUC_HOST var with the same content as the XUC_HOST var in your XiVO CC configuration

MEETING_ROOMS_HOST_IP var with the meeting rooms server IP address. It must be the meeting rooms server IP address accessible for your LAN client. It must be set otherwise nothing will work correctly.

XIVO_HOST with the VoIP IP of the XiVO PBX It will be the IP towards which the Jitsi SIP gateway will register its SIP peer.

JWT_APP_SECRET with the same content as the CONFIGMGT_AUTH_SECRET var defined in your XiVO’s /etc/docker/xivo/custom.env file

Fill in also parameters linked to XiVO Edge (which is a prerequisite to use Meeting Room Server - see Requirements):

TURN_HOST var with the Edge STUN/TURN server FQDN (i.e. which must be a FQDN corresponding to the certificate configured on the Edge STUN/TURN server).

TURN_CREDENTIALS var with the value of the TURN_SECRET configure in the Edge TURN Server (the secret generated during TURN Server Secret).

Start the services 

Start the services:

docker login -u xivoxc
(use the token provided by the XiVO team)

meetingrooms-dcomp pull && docker logout
meetingrooms-dcomp up -d

Edge Configuration 

Note

These steps are to be done on the XiVO CC.

On the Edge server you must add the Meetingroom server IP address in the TURN_ALLOWED_PEERS.

Please refer to TURN Server Relay Authorization section.

XIVO CC Configuration 

Note

These steps are to be done on the XiVO CC.

If you are using the XiVO UC add-on mode you must follow the sub-section below: XiVO UC add-on Configuration

On XiVO CC, to be able to use the video service you must configure the NGINX_JITSI_HOST variable.

Add the NGINX_JITSI_HOST value in the /etc/docker/compose/custom.env file:
```
NGINX_JITSI_HOST=<IP Address of the Meeting Rooms server>
```
Relaunch the services

xivocc-dcomp up -d

XiVO UC add-on Configuration 

Important

This section applies only if you are in the XiVO UC add-on mode.

With XiVO UC add-on, to be able to use the video service you must configure the NGINX_JITSI_HOST variable.

Add the NGINX_JITSI_HOST value in the /etc/docker/xivo/custom.env file:
```
NGINX_JITSI_HOST=<IP Address of the Meeting Rooms server>
```
Relaunch the services

xivo-dcomp up -d

XiVO Configuration 

Note

These steps are to be done on the XiVO

If you are using the XiVO UC add-on mode you must also follow the section XiVO UC add-on Configuration

Configure Jitsi properties in your custom env 

Edit /etc/docker/xivo/custom.env file :

MEETINGROOM_AUTH_DOMAIN=<The domain serving the service, i.e. "meet.jitsi" by default, can be also set to "*">
MEETINGROOM_AUTH_APP_ID=<Value of the JWT_APP_ID defined in your jitsi .env file>

Configure the Trunk to Jitsi 

On XiVO, go on page Services ‣ IPBX ‣ Trunk management ‣ SIP Protocol, and create a SIP trunk with:

Tab General:
- Name: xivo-jitsi
- Username: xivo-jitsi
- Password: put the value of the JIGASI_SIP_PASSWORD variable in the /etc/docker/meetingrooms/.env
- Connection type: Peer
- IP addressing type: Dynamic
- Context: default
- Media server: MDS Main
- NAT: Yes (force rport + comedia)
Tab Advanced:
- Redirect media streams: No

Then restart the jigasi docker on Meeting Room server:

meetingrooms-dcomp restart jigasi