WebRTC Environment¶

One can use WebRTC with XiVO PBX and XiVO CC in the following environment:

LAN network (currently no support for WAN environment),
with the:
- UC Assistant or CC Agent with Chrome browser version 57 or later
- or Desktop Application

Requirements¶

The requirements are:

to have a microphone and headphones for your PC,
to configure your XiVO PBX:
- open WebRTC access (see:Configuration of XiVO PBX for WebRTC) taking great care of the security notice,
- and then create users with a WebRTC line (see: Configuration of user with WebRTC line),
have a SSL/TLS certificate signed by a certification authority installed on the nginx of XiVO CC (see: Signed SSL/TLS certificate for WebRTC),
and use https:
- UC Assistant: you must connect to the UC Assistant via https protocol,
- Desktop Application: you must check Protocol -> Secure in the application parameters.

Note

Currently you can not have a user configured for both WebRTC and a phone set at the same time.

Known limitation are :

Voice may not be able to hear if your computer have more than 4 network interfaces up at the same time (this can happen if you use virtualization)

Note

To check if you have more than 4 network interfaces you can type following command:

ls /sys/class/net

Then just use:

ifdown <ifname>

This will switch off network interface not required to make your call.