Intended usage and features

The XiVO Centralized User Management (XCU) is intended for multi-Xivo systems with centralized routing and user management.

Warning

Using XCU for other use-cases than the one described bellow is neither supported nor recommended. If XCU routing schema or centralized user management does not fit your use case, XCU is not good solution for your telephony system. Using XCU for user management only is not recommended. Non-standard installations may be broken by update to future version without warning.

Routing

Routing supports heterogeneous numbering plan administration:

  • Centralized dialplan management.

  • Route incoming and outgoing calls, independently of the entry point to the target telephony subsystem hosting this number.

  • Simple configuration of dialplan richness (prefix, short numbers, numbers of different length, emergency calls, live destination modification).

  • Easily configurable protection against routing loops.

Routing is using concept of two layers:

  1. “Logical” layer - based on contexts, users are routed using centralized database returning the context to be used to reach the user, with extensions correctly routed irrespective to point of entry of call.

  2. “Physical” layer - arbitrary connection (direct or indirect) via trunks is supported. Trunks are associated to contexts to reflect the real network topology, there’s no need of full-mesh topology, a call can pass by multiple Xivos before reaching the user.

Mapping between “Logical” and “Physical” layer is done by routing contexts. Every Xivo has routing context for every other Xivo (attached to trunk it will use). Routing context with the same name on different Xivo will be configured accordingly to the position of the Xivo in the network. Intervals can overlap between Xivos, therefore logical structure of dialplan can be independent on physical location of users.

../../../_images/XCU_routing.png

See Configuration of Xivos for Centralized Routing for more configuration details.

Implementation of routing

When there is dial request on some Xivo and destination number is not found locally, AGI script in the dialplan requests a route from the routing database and gets:

  • A context used to process the call.

  • Rules to update the destination number.

  • Requests can be chained.

Note

Routing systems provides also the conversion of the direct incoming number to the user’s short number, this conversion is done when the call enters the system, between Xivos only the short number is used. This condition needs to be respected when creating a new system or integrating an existing one. When integrating an existing one, you may need to create some routes manually.

Fault tolerance:

  • Local calls work, even when other network links and/or centralized user database are unreachable.

Centralized user management

User management allows centralized administration without knowledge of low-level telephony details:

  • Configuration is done from point of view of organization administrator, not telephony technician.

  • User creation is simplified by line templates.

  • Only relevant choices and options are presented.

  • Extension number for new user is checked to be unique among all Xivos.

  • Numbers proposed when creating a user are based on their availability.

  • XCU accounts can be restricted to manage only part of the system.

  • All configuration changes are logged for auditability.

Compatibility with configuration via Xivo WebUI:

  • Users added by Xivo WebUI before adding Xivo to XCU are imported, but they not reachable by centralized routing.

  • Combining user management by XCU and by Xivo WebUI is bad idea, which usually leads to misconfiguration.

  • Managing users by XCU and call-center configuration (Queues, Agents) via Xivo WebUI is possible, but queue numbers are not reachable by centralized routing automatically, you need to add manual routes if needed.

  • Configuring conference rooms via Xivo WebUI is possible, but conference room numbers are not reachable by centralized routing automatically, you need to add manual routes if needed.

XiVO integration

Both freshly installed XiVO or an already configured XiVO can be added to the user management system. Steps to be followed are:

  • When adding a freshly installed XiVO, you need to pass the XiVO Wizard and then follow steps described in Create XiVO.

  • When adding an already configured XiVO (a XiVO used since a while with users etc.), you follow the same procedure as for a freshly installed XiVO, but you must pay attention to following restrictions:

    • Existing users will be imported in the centralized management, but currently the system doesn’t create any route and these users are not reachable automatically, you need to add manually required routes.

    • Existing internal contexts are converted to Entities and created in the management system.

    • Ensure to have considered the interval overlapping option described in the Configuration.