Default configuration for France

Note

This option was introduced in 2017.01 version.

During the wizard you can choose to apply a default configuration for France : see Wizard configuration step. This option introduce a set of default parameters that will be useful particularly for a XiVO PBX installed in France.

The default parameters configured are listed in the sections below.

Default SIP parameters

In Services ‣ IPBX ‣ General settings ‣ SIP Protocol the following parameters are changed:

  • for call presentation (in tab Default):

    • Trust the Remote-Party-ID is set to Yes

    • Send the Remote-Party-ID is set to PAI

  • for codecs order (in tab Signaling): G.711 A-law > G.722 > G.729A > H.264 is the default order.

Outgoing call rules

A set of default outgoing call rules according to the French numbering plan is set up by default. In Services ‣ IPBX ‣ Call management ‣ Outgoing calls two outgoing call rules are defined:

  1. sortants-france: pattern for french numbering plan numbers,

  2. urgences-france: pattern for french emergency numbers.

Note

For these outgoing call rules, a ‘void’ cutomized trunk named ‘Local/template_a_changer’ is defined. This one must be deleted or modified according to your configuration.

Right call rules

Also, a set of right call is predefined according to the set of outgoing call rules. In Services ‣ IPBX ‣ Call management ‣ Call permissions you will find the following preconfigured right call group:

Name [1]

Action

Description

national

Allow

Patterns for national numbers.

urgences

Allow

Patterns for emergency numbers.

mobiles

Allow

Patterns for mobile numbers.

numeros-a-valeur-ajoutee

Allow

Patterns for services numbers.

international

Allow

Patterns for international numbers.

refuser-tout

Allow

Patterns for all.

Default template device

The ‘Default config device’ template (in Configuration ‣ Provisioning ‣ Template device) has preconfigured language and time zone.