To debug asterisk crashes or freezes, you need the following debug packages on your XiVO:
Commands (replace <VERSION_INSTALLED> by the version installed on your XiVO - for example xivo-freya):
xivo-dist <VERSION_INSTALLED> apt-get update apt-get install gdb apt-get install -t <VERSION_INSTALLED> asterisk-dbg xivo-libsccp-dbg
So There is a Problem with Asterisk. Now What ?¶
Find out the time of the incident from the people most likely to know
Determine if there was a segfault
grep segfault /var/log/syslogshould return a line such as the following:
Oct 16 16:12:43 xivo-1 kernel: [10295061.047120] asterisk: segfault at e ip b751aa6b sp b5ef14d4 error 4 in libc-2.11.3.so[b74ad000+140000]
Note the exact time of the incident from the segfault line.
Follow the Debugging Asterisk Crash procedure.
If you observe some of the following common symptoms, follow the Debugging Asterisk Freeze procedure.
- The output of command
service asterisk statussays Asterisk PBX is running.
- No more calls are distributed and phones go to
core show channelsreturns only headers (no data) right before returning
- The output of command
Fetch Asterisk logs for the day of the crash (make sure file was not already logrotated):
cp -a /var/log/asterisk/full /var/local/`date +"%Y%m%d"`-`hostname`-asterisk-full.log
Fetch xivo-ctid logs for the day of the crash (make sure file was not already logrotated):
cp -a /var/log/xivo-ctid.log /var/local/`date +"%Y%m%d"`-`hostname`-xivo-ctid.log
Debugging Asterisk Crash¶
When asterisk crashes, it usually leaves a core file in
You can create a backtrace from a core file named
gdb -batch -ex "bt full" -ex "thread apply all bt" asterisk core_file > bt-threads.txt
Debugging Asterisk Freeze¶
You can create a backtrace of a running asterisk process with:
gdb -batch -ex "thread apply all bt" asterisk $(pidof asterisk) > bt-threads.txt
If your version of asterisk has been compiled with the DEBUG_THREADS flag, you can get more information about locks with:
asterisk -rx "core show locks" > core-show-locks.txt
Debugging freeze without this information is usually a lot more difficult.
Optionally, other information that can be interesting:
- the output of
asterisk -rx 'core show channels'
- the verbose log of asterisk just before the freeze
It’s relatively straightforward to recompile the asterisk version of your XiVO with the DEBUG_THREADS and DONT_OPTIMIZE flag, which make debugging an asterisk problem easier.
The steps are:
deb-srcline for the XiVO sources:
sed -i 's/^# *deb-src/deb-src/' /etc/apt/sources.list.d/xivo*
Fetch the asterisk source package:
mkdir -p ~/ast-rebuild cd ~/ast-rebuild apt-get update apt-get install -y build-essential apt-get source asterisk
Install the build dependencies:
apt-get build-dep -y asterisk
Enable the DEBUG_THREADS and DONT_OPTIMIZE flag:
cd <asterisk-source-folder> vim debian/rules
Update the changelog by appending
+debug1in the package version:
Rebuild the asterisk binary packages:
dpkg-buildpackage -us -uc
This will create a couple of .deb files in the parent directory, which you can install via dpkg.
Recompiling a vanilla version of Asterisk¶
It is sometimes useful to produce a “vanilla” version of Asterisk, i.e. a version of Asterisk that has none of the XiVO patches applied, to make sure that the problem is present in the original upstream code. This is also sometimes necessary before opening a ticket on the Asterisk issue tracker.
The procedure is similar to the one described above. Before calling
dpkg-buildpackage, you just need to:
apt-get install -y quilt
Unapply all the currently applied patches:
quilt pop -a
Remove all the lines in the
truncate -s0 debian/patches/series
When installing a vanilla version of Asterisk on a XiVO 16.08 or earlier, you’ll need to stop monit, otherwise it will restart asterisk every few minutes.
Running Asterisk under Valgrind¶
apt-get install valgrind
Recompile asterisk with the DONT_OPTIMIZE flag.
/etc/asterisk/modules.confso that asterisk doesn’t load unnecessary modules. This step is optional. It makes asterisk start (noticeably) faster and often makes the output of valgrind easier to analyze, since there’s less noise.
/etc/asterisk/asterisk.confand comment the
highpriorityoption. This step is optional.
Stop monit and asterisk:
monit quit service asterisk stop
Stop all unneeded XiVO services. For example, it can be useful to stop xivo-ctid, so that it won’t interact with asterisk via the AMI.
Copy the valgrind.supp file into /tmp. The valgrind.supp file is located in the contrib directory of the asterisk source code.
Execute valgrind in the /tmp directory:
cd /tmp valgrind --leak-check=full --log-file=valgrind.txt --suppressions=valgrind.supp --vgdb=no asterisk -G asterisk -U asterisk -fnc
Note that when you terminate asterisk with Control-C, asterisk does not unload the modules before exiting. What this means is that you might have lots of “possibly lost” memory errors due to that. If you already know which modules is responsible for the memory leak/bug, you should explicitly unload it before terminating asterisk.
Running asterisk under valgrind takes a lots of extra memory, so make sure you have enough RAM.